Published at Saturday, October 13th 2018. by Geneva Nixon in Bathroom Vanity.
Then we do the same for the other pipes. And there we have our two markings for our hole saws to go. Through. Very important part of this is to make sure that you get your hole, saw bigger than the pipes that we have so that when we slide our vanity over the top, it fits nice and easy. So before we start to drill, just make sure you've got the center of your drill bit aiming right at the middle of where you put your X and you'll get a perfect cut every time. So now we've got our holes drilled and ready to go for our pipes to go in so now.
What we need to do is take our vanity back into our bathroom and slide it over our pipes. And we've put our backing panels back in so it looks brand new and the next step we're gonna do is insert some screws into the sides here. So we can secure it to the wall and it's not gonna move. So before we fasten this to the wall, I'm just gonna make sure it's nice and level. And everything looks fantastic.
So let's get started. And what we're gonna do is just make two incisions into the wall in the back of our vanity. So we can secure it nice and safe. all plugs very, very simple, we cut a little bit off our roll and what we do is push it straight into the hole the vanity now. So now that we've screwed, that in just give it a little check and give it a little bit of a pull., Make sure it doesn't move and what we've done here looks perfect.
Any content, trademark’s, or other material that might be found on the pacificnorthwestmovies.com website that is not pacificnorthwestmovies.com’s property remains the copyright of its respective owner/s. In no way does pacificnorthwestmovies.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 pacificnorthwestmovies.com. All Rights Reserved.