Published at Wednesday, 31 October 2018. Bathroom Vanity. By Sarah Fleming.
So we've already got our drain connected right here and now I'm going to start with the spout. I always want a little bit of plumber's putty at the place where we're going to try to seal water from getting down between the faucet or the spout and the sink itself. Here's the hot stem putty, so we don't mangle the threads or the chrome. They've got a little shoulder on each side right here that allows you to put an adjustable open, end wrench on it.
This is an o-ring connection, but I like to put a little bit of pipe joint compound on the threads and the last part of this faucet to install is the pop-up assembly. It has a linkage right here that you lift, and that makes the stop or go down that holds water in the sink.
Here's the branch that's going to come right back and come right through our cabinet, and now I just need to establish what height I need to drill my hole. All of our holes have been drilled, we've got the drain lines and the two lines for hot and cold. We clean it. We glue it and hold it for five counts, and now we make our Y branch connection to the new sink and I'm going to adapt onto the tailpiece is a trap adapter here and a short piece.
Any content, trademark’s, or other material that might be found on the pacificnorthwestmovies.com website that is not pacificnorthwestmovies.com’s property remains the copyright of its respective owner/s. In no way does pacificnorthwestmovies.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2019 pacificnorthwestmovies.com. All Rights Reserved.