Published at Wednesday, October 10th 2018. by Jackie Irwin in Bathroom Vanity.
Concrete vanity top for the master bathroom. I've gone ahead to save some time. I've done a bunch of work already, and I just want to talk about what I've done so far. What I have here is a 48-inch vanity table, it's actually slightly bigger than that, it's 50 inches by 21 and a half inches, it's 2 inches deep. The reason why it's slightly bigger is, I want a half inch overhang all the way around the tabletop.
There is a roughly 1/2 inch thickness of this rough rock edge liner. I got this from a place called concrete expressions Ltd, it's 2 inches, so it's the same height as my box here and I'm hoping that it's gonna kind of give it a nice cool. Finish along the front and the sides to match kind of the tile work that I have in there, which is a stone tile. Look, so I've just cut it and paste it into each side, except for the back.
In addition to that, I've gone around and I've hit all the edges along the base of the edge liner and the corners of where my melamine touches each other to just seal those corners. Give it a nice rounded over edge. You can use any color silicone that you want I'm using black only because the melamine is white, and so the contrast is eased as easy to see you can see where you've used too much thin it out or anything like that. You can use clear. You can use white.
I just chose to use black because it's easier to see. Let's talk about some of the other stuff that I have here. This is a 24-inch sink mold. This is a fiberglass sink mold and then I've gone ahead and I put on three coats of this mold release wax. This is a brand new mold. I've never used it before. I want to make sure that the concrete doesn't stick to it. When I pour it and that it's easy to kind of remove when I need to in addition to that, I've got these rubber sink knockouts. I went ahead and I measured out where my faucet I wanted my faucet to be.
You may not need three. I use three because I have a fixture that has three independent. You know two faucet handles and one main faucet stem itself, but make sure you know what fixture you're gonna use prior to doing this so that you know what how many knockouts you need and where they need to be spaced and all that kind of stuff.
Any content, trademark’s, or other material that might be found on the pacificnorthwestmovies.com website that is not pacificnorthwestmovies.com’s property remains the copyright of its respective owner/s. In no way does pacificnorthwestmovies.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 pacificnorthwestmovies.com. All Rights Reserved.