Published at Tuesday, October 30th 2018. by Greta Wilkerson in Bathroom Vanity.
I'm kicking off the new year by remodeling our guest bathroom, starting with this vanity and sink cabinet making is very simple. It'll save you a lot of money and you can customize it to fit any space. This vanity is a full 5 inches taller than the old one, making it a lot more comfortable to use. Before I get started. I have a couple of channel announcements.
This will be the exact same video you're, seeing here for free, except without any ads or additional demonization. If this sounds like something that interests you just go over to my patron page to sign up. Finally, don't forget to sign up for dear minutes by blog channel. We have a lot of fun over there. Some of it would work now I apply what I've used is kind of cheap.
So I put down a layer of blue painters tape which should help control the chip out on that top layer, and I don't need any of the take-ups when I'm cutting in the direction of the grain I'll join the cabinet together using pocket screws I'll, conceal them. Underneath this thin plywood sheet for the back is going to get the cabinet a lot of extra strings I'll, just tap it into place.
Before I assemble these pieces for the base, I need to cut a hole in one piece for this heat register I'll put screws in the backside, since they won't be visible, I'll use, finishing nails on the front that way I'll be able to cover up the holes With speckling - and these triangles will give it extra support, I'm using solid lumber for the face frame and I'll assemble it using pockets.
Any content, trademark’s, or other material that might be found on the pacificnorthwestmovies.com website that is not pacificnorthwestmovies.com’s property remains the copyright of its respective owner/s. In no way does pacificnorthwestmovies.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 pacificnorthwestmovies.com. All Rights Reserved.