Published at Wednesday, October 10th 2018. by Loretta Hobbs in Bathroom Vanity.
So have our vanity done 36 inches wide and the depth of the 21 22 counts, depending on the size of the city, with a recessed back front here, and then the sides over there and the bottom will be a pullout drawer step for my grandboy. Okay, so these boards here marked with 36, so a little-oversized cut those up and those will make up the top trim the sides of the 2x4 to make it square and then will join these together.
Here's the vanity top without me, so I have cut the bevel off all these two by fours, as you can see here each other, and so now we're going to glue up and then we'll just plain the top of this you get smooth. Well, we've got some rustic holes and stuff in here and in the middle of this, we'll have the sink. So this is our reclaimed wood sink top for our vanity, so we're making a rustic top. This top the lesson of the story so I'll have my table legs glued up. Well, the two by fours that have been smooth that on one side take off the round over what I'm going to do is cut these two by two.
So this is the reference point. So I'm going to cut off this section here and then come back over here and cut off that section. There that'll leave me a two by two all right: there we go well. This is the piece we're saving, so we know that we're cutting two inches. This way, we'll cut that and then we'll come back and cut that. So I have my wind board in here. This is gonna, be the back splash.
Any content, trademark’s, or other material that might be found on the pacificnorthwestmovies.com website that is not pacificnorthwestmovies.com’s property remains the copyright of its respective owner/s. In no way does pacificnorthwestmovies.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 pacificnorthwestmovies.com. All Rights Reserved.